Book this course

Course Name:

ASME Plant Inspector Level 2

Overview

ASME Plant Inspector L2 – eLearning

 

ASME Plant Inspector Level 2 eLearning – Study in your own time: Restrictions of rotas and training dates are a thing of the past!

 

ASME Plant Inspector Level 2 eLearning is much the same as our original ASME level 2 course only amalgamated into an eLearning format. All of the same topics are delivered in a systematic format. The course is designed to cover the in-service processes of the pressure equipment life cycle. Primarily, it is intended to provide the knowledge to compile an Inspection Plan/Written Scheme of Examination and conducting the relevant post inspection assessments. The ASME Plant Inspector Level 2 training course introduces management and planning activities such as Risked Based Inspection and screening of pressure vessels for Non-Intrusive Inspection.

Delegates will be introduced to API 579/ASME FFS-1 and will learn how to conduct Level 1 assessments for localised and general metal loss while being provided with an insight into the applicability and limitations of such evaluations.

The course provides the necessary knowledge to make Run, Repair or Replace decisions. ASME PPC 2 is introduced to give the repair options, while API 510/570 is introduced for the re-rating procedures.

 

 

Course Suitability:

Ideal for those wishing to progress from Level 1, or for experienced inspectors and engineers looking to expand their technical knowledge, the ASME Plant Inspector Level 2 eLearning training course provides an intensive but practical challenge.

eLearning Subjects Covered:

– Pressure Equipment Design and Materials
– Damage Mechanisms and Inspection
– Inspection Planning and RBI
– Fitness for Service
– Repair Selection

eLearning Duration:

Approx. 60 hours of training with 4 months online access.

All of the same content as our classroom course however with more time, so you can work your way through each topic comfortably at your own pace. This means plenty time to return to each module and revise till your heart (or brain!) is content. You can arrange to sit your exam as soon as you feel confident, you do not have to wait till the end of your online training duration before sitting your exam.

When & Where Do I Sit The ASME Examination On Completion Of eLearning?

The ASME eLearning exam is completed online on a date of the candidates choice. Candidates require a reliable internet connection and webcam for invigilation purposes.

Why Choose eLearning?

  • Cost effective: No venue, travel, catering or accommodation fees to pay
  • Study in your own time: Restrictions of rotas and training dates are a thing of the past
  • Study on the go: Our courses are mobile friendly, meaning you don’t have to be in front of a computer.
  • 24-7 access to our eLearning platform available on laptop, desktop, mobile and tablet. All you require is a reliable internet connection.
  • Study at your own pace: There are no time restrictions and you can reread the content as many times as you like till you feel completely comfortable in your understanding
  • Lacking confidence: Not everybody feels comfortable learning in a large group, but eLearning allows everyone to tackle the subject at their own pace, with interactive tasks ensuring a thorough understanding throughout each of our training modules.
  • Eco-Friendly: Paperless learning
  • 1 to 1 communication: Our lecturers will still be on hand to take calls and answer e-mails should you require further support with any topic or module. Alternatively, Skype or zoom video calls can also be arranged

If eLearning is not for you, don’t worry! You can book on our classroom training now.

Did you know? If you attend our ASME Plant Inspector courses you can get 12 months of ASME Membership free!

Course Modules

Module 1 – Pressure Equipment Design and Materials
  • Using ASME VIII Div.1 and PD5500
  • Min. Allowable Stresses versus actual allowable Stress
  • Using material certificates
  • Material properties (Fracture Toughness and Impact Testing requirements)
  • Material compatibility and weldability
  • Wall loss mechanisms
  • Mechanical damage mechanisms
  • High-temperature mechanisms
  • Determining the correct NDT methods
  • Applicability and Limitations of examination methods
  • Corrosion Risk Assessments
  • RBI methodologies
  • API 579 Part 4 General Metal Loss
  • API 579 Part 5 Localised Metal Loss
  • Applicability and Limitations
  • Damage modes and failure modes
  • Determination to Run, Repair or Re-rate
  • Determine most suitable
  • Mechanical Repairs
  • Composite Repairs
  • Testing and Examination requirements
  • Temporary repair inspection and recording requirements
Course Name:

ASME Plant Inspector Level 2

Price:

£2,250.00 + VAT

  Ask a Question

Courses

E-Learning Courses
Engineering Surveyor Inspector API 936 Refractory Personnel Certification API 1169 Pipeline Inspector Certification Course API 579 Fitness for Service (FFS) Training Course ASME Wind Turbine Inspector eLearning ASME Plant Inspector Level 1 – Full Course ASME Plant Inspector Level 1 – Block 1 (Intro and Modules 1 and 2) ASME Plant Inspector Level 1 – Block 2 (Modules 3-5) ASME Plant Inspector Level 1 – Block 3 (Modules 6-8) ASME Plant Inspector Level 1 – Final Examination Module ASME Plant Inspector Level 2 ASME Plant Inspector Level 2 – Block 1 (Modules 1-3) ASME Plant Inspector Level 2 – Block 2 (Modules 4-7) ASME Plant Inspector Level 2 – Block 3 (Modules 8-10) ASME Plant Inspector Level 2 – Final Examination API 570 CPD Training API 510 CPD Training Pressure Relief Valves Inspection API 577 Welding Inspection & Metallurgy Online API 580 Risk Based Inspection (RBI) Online API 571 Corrosion & Materials Online
Asme Courses
ASME Plant Inspector Level 1 ASME Plant Inspector Level 2 ASME Plant Inspector Level 3 Pressure Relief Valves Inspection
API Courses
API 580 Risk Based Inspection (RBI) Classroom API 571 Corrosion & Materials Classroom Training API SIRE – Source Inspector Rotating Equipment API 1169 Pipeline Construction Inspector API 653 Aboveground Storage Tank Inspector API 936 Refractory Personnel API 570 CPD Training API 510 CPD Training API 577 Welding Inspection & Metallurgy Online API 571 Corrosion & Materials Online API 570 Process Pipework Inspector API 510 Pressure Vessel Inspector
Technical Courses
Package Boiler Inspection Report-Writing Masterclass Workshop Preventing Engineering Failures ASME PCC 2 Pressure Equipment Repair API 579 Fitness for Service (FFS) Training Course Offshore Structures Inspection and Risk Management PCN Inspection Engineer Level 1 PCN Inspection Engineer Level 2 PCN Inspection Engineer Level 3 Pressure Relief Valves Inspection Pressure Testing Training Course

Win an API 580/577 e-learning course and Plant Inspector Guidebook